Filter By:

  • Show More Sizes
  • Show Fewer Sizes

BMX

(101 matches)
Odyssey Mike Aitken Grips
$9.99
Mike has wanted to do a signature grip with Odyssey for a long time. After trying out various grips over the years, he settled on the style you see above. Comfortable circular pattern with a medium feel and Mike Aitken’s approval!
Odyssey Tom Dugan Fang Sprocket
$51.99
This is Tom Dugan’s all new signature sprocket. In addition to its classic look, the Fang increases in thickness towards the center of the sprocket for increased strength. - 7075 Aluminum - Sweet machining
Odyssey Twisted PC Pedals
$13.99 - $17.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Odyssey Aaron Ross BOSS Signature Grips
$9.99
In addition to updating Aaron’s tire, Odyssey also wanted to update his signature grip. The updated “Boss” grip features a low profile block pattern which will match his tire, and comes in at 158mm. These will feel similar to his original grip, but improved and with all new styling.
Odyssey BOSS Stem
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Aaron Ross’ signature BOSS stem is a classic top load design with 52mm of reach and a 35mm rise. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined SPECS - 52mm reach - 35mm rise - 11 oz
Odyssey Broc Raiford Signature Grips
$9.99
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.
Odyssey Graduate PC Peg
$18.99
The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - Sold individually - 14mm with 3/8” adapters only - Replacement sleeves sold separately - 4.5" (length) x 1.5" (outer diameter) - 4.5 oz (9 oz for a pair)
Odyssey Graduate PC Pegs - Replacement Sleeve
$5.99
Replacement Sleeve for Odyssey's Graduate PC Peg. Sold individually.
Odyssey High Pressure Rim Strips
$4.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
Odyssey Key Chain
$33.99 - $43.99
Traditional chain pins are 3mm in diameter. The Key Chains are 5mm, and they are available with a hollow or solid pin assembly. These oversized pins are 4 times stronger than traditional pins, and the chances of bending one, whether the pin is hollow or solid, are essentially zero. The 5mm riveted pins provide added strength, but they also provide a bigger contact surface with the chain’s plates, which makes them harder to push out or bend. The hollow pin assembly, by design, allows for a stronger rivet connection to form during manufacturing, resulting in a stronger chain overall. Each plate has a low profile and an extra narrow waist that makes it harder to catch the plates at unwanted times. At 1.4mm, the plates are substantially thicker than the plates of any other chain, and they’re also more than 50% harder to bend than the thickest existing 1.2mm chain plates too. Users can break and re-join the chain with just a 3mm hex key. The chain’s half link plates are taller at the bends to both increase stiffness and minimize stretch. Since the use of a chain breaker to re-join the chain has been eliminated, the pins can retain their original level of tightness from the factory. Also, carrying a spare master link and 3mm allen key in most cases is enough to repair the Key Chain when riding, so lugging around a chain tool is usually unnecessary. By using material as efficiently as possible, Odyssey has strengthened every component of the chain and kept the weight in the same range as their Bluebird chain. Stretching of the chain is minimized by using a standard alternating plate pattern and limiting the chain to a single, beefed up half link. This configuration maximizes the lifespan of the sprocket and driver. - Width: 1/8-inch
Odyssey R25 Fork
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Odyssey Tom Dugan Tires
$25.99
Tom likes to ride fast and go very high. These tires were designed to help him do just that. With a fast center tread, these tires are made for park, street and even dirt too. The side profile is reminiscent of a motorcycle tire as well, which is a nod to Tom’s motorcycle lovin’ ways.
GSport Uniguard Hub Guard
$14.99
The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.
Odyssey 7KA Rim
$89.99
The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm
Odyssey Aaron Ross BOSS Bars
$74.99
Introducing the BOSS bar. Aaron Ross’ new signature handlebar now features a 9.125-inch rise along with a traditional 7/8-inch crossbar tubing for superior strength and durability on taller bars. SPECS - 9.125-inch rise - 29-inch width - 12° backsweep - 2° upsweep - Multi-Butted 41-Thermal® processed 4130 chromoly - Weight 34.6 oz
Odyssey Ghost Brake Pads
$8.50
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Odyssey MPEGs Steel Pegs
$15.99
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Odyssey Quartet Hub Guard
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
Odyssey R/F Series Pre-Load Bolt
$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
Odyssey Slim Seat Clamp
$9.99
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
GSport G.L.A.N.D. MK IV Hub Guards
$9.99
The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.
GSport Simian Hub Guard
$24.99
Designed specifically for use with the Simian Front Hub. TECHNICAL SPECIFICATIONS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
WeThePeople Raptor Grips
$9.99
Check out the dinosaur skin-like texture of WeThePeople's Raptor grips! Like a raptor, you can wrap your claws around these grips and let the good times roll. The soft, VEX rubber compounds conforms perfectly to your hand, and holds up great to long days on the bike. • 150mm Long, 27.8mm Diameter • 30 durometer rubber • Low flange design • Includes WeThePeople nylon barends
WeThePeople Supreme Bar Ends
$23.99
Protect your bars and prevent your grips from getting shredded with WeThePeople's Supreme Bar Ends. CNC machined from 6061 aluminum, these tough, bolt-in end caps protect your investment from tons of abuse when you have to jump ship on an imperfect execution of a trick. Simply slide them into the ends of your handlebars and tighten them up. Then, go nuts!
WeThePeople Grippin 20 x 2.25
$33.99
WeThePeople's Grippin tire is an excellent all-around tire. With a semi-tread design and a durable, grippy rubber compound, this tire can rail dirt berms and vert ramps alike.
WeThePeople Patron Fork
$149.99
WeThePeople's Patron fork is all about choices. The 7mm full-investment casted heat-treated hollow dropouts are what make this fork so special and are offered in either a traditional 35mm offset or a more street orientated 25mm version for all the front-wheel jedis out there. This is the go to choice for most of the WTP pro team, so you know it's got to be good. • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 25mm or 35mm • Dropout: 7mm, full investment cast, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
WeThePeople Team Pivotal Seatpost
$26.99 - $27.99
WeThePeople's Team Pivotal seatpost is made from 6061 aluminum for a perfect blend of strength and weight savings. It works with all Pivotal seats and it's 200mm long for plenty of adjustability.
WeThePeople 7000 Top Cap
$12.99
Material: premium quality 7075-T6 alloy topbolt plus washer Size: M24 x 1.5mm pitch (fits to 2011/ 2012/ late 2013 and 2014 forks) Weight: 33g (1.12oz : 0.07lbs)
WeThePeople Sterling - Pete Sawyer Signature Fork
$159.99
Ground breaking riding deserves a fork so burly fork that it can literally break the ground, should the need arise. WeThePeople's Sterling fork is masterfully crafted to meet the insane demands of team rider, Pete Sawyer. The Sterling can handle it all, and it looks good doing it. Find a matching color scheme on the Sterling signature frames too! • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 32mm • Dropout: 6mm laser cut & CNC machined, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
WeThePeople Arrow 146 Grips
$9.99
WeThePeople's Arrow 146 Grips have the perfect texture and density to give you newfound confidence while railing it on the bike. Material: VEX rubber compound Size: 146mm x 28mm Specials: soft angled rib design with medium-sized flange; includes WeThePeople nylon barends
Page 1 of 4 Next page