Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Forks

Whisky Parts Co. No.9 Carbon Mountain Fork 29-inch
$520.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Whisky Parts Co. No.9 Carbon Disc Cyclocross Fork w/Fender Mounts
$520.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Surly Long Haul Trucker Disc Fork (26-inch)
$125.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire
Ritchey WCS Carbon Cross Disc Fork
$429.95
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: Tapered 1-1/8 – 1.5-inch - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Rotor size: 140mm (160 w/ adapter) - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 440g (w/ uncut steerer) - Compression plug included
Surly Pack Rat 650B Fork
$125.00
Designed with the Surly Pack Rat frame, this fork is built with front cargo caryying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 650B x 48c
Whisky Parts Co. No.7 Road (12mm Thru-Axle)
$399.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
Salsa Cro Moto Grande 29er Fork
$209.00
Salsa Cro Moto Grande Fork 29". - Disc only 29" rigid fork - Suspension corrected for 80mm travel fork - Maxle Included - Axle to Crown Length: 483 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Material: Chromoly Steel - Offset: 45 mm - Wheel Mount Center Offset (mm): 0 - Steerer Tube Length (mm): 260 mm - Weight: 1080 g
Salsa Makwa Carbon Fork
$499.99
The Makwa fork is Salsa's fat bike race fork. Lightweight and stripped of extras, its thru-axle design boosts stiffness and aids in solid tracking on the trail. This fork is spec’d on Salsa's 2014 Beargrease bikes, and is also fully compatible with their 2014 Mukluk frames. - Axle-to-Crown Length: 483mm - Brake Type: Disc - Brake Usage F/R: Front - Color: Black - S.H.I.S. Crown Race Diameter: 40 - Fork Rake: 51mm - Front Axle Type: 15mm thru - Front Axle Size: 15 x 171L, TP=1.5, TL=10 - Front Hub Spacing: 142mm - Material: Carbon - S.H.I.S. Clamp Diameter: 28.6 - Steerer Tube Length: 260mm - Steerer Type: Tapered - Weight: 720g - Compatible with all 26 x 4.0–5.0" tires and 29+ tires
WeThePeople Battleship Fork
$159.99 - $164.99
WeThePeople's Battleship Fork is strong and technical with super thick investment cast dropouts that are designed to be the perfect partner for WTP's most popular frame. - Super short 24mm offset street fork - Invest cast dropouts and fork end, designed to work flawlessly with plastic pegs and hub guards - Incredibly strong design - 7075-T6 alloy top bolt, M24 thread - Tapered, triple butted fork blades - Integrated crown race, designed to work with integrated headsets with a 45-degree bearing
Radio Nemesis Fork
$144.99
Our Nemesis fork is built to last and take a serious beating. This fully heat-treated chromo fork features slimmer 5mm-thick CNC machined dropouts and a shorter 25mm offset, giving you a more responsive front end, so if you're going front peg first down a handrail, or blasting a quarter pipe then this is one solid fork you can trust.
ENVE Cross Disc Fork
$542.00
The ultimate carbon fiber disc brake compatible cyclocross fork. ENVE created this fork because we love cyclocross racing and gravel road adventures. Like all ENVE products, this fork was developed from a desire to improve the ride experience. In this case they knew that a thru-axle would make for a better tracking and braking front end. A quiet ride is also a priority, so the addition of a thru-axle means less rotor rub and caliper adjustments. Because the majority of time isn’t spent racing under UCI rule, they made this fork compatible with high volume tires — you can run up to a 45mm (1.9-inch) tire with a 700c wheel and up to a 50mm (2.0-inch) tire if you are running 650B. Using our proprietary molding methods, the thru axle disc cyclocross fork offers the ultimate in cyclocross and gravel road bike performance. From steerer tube to dropout the forks are constructed in one piece, which equates to a very efficient structure that yields a lightweight and highly durable product. The front thru-axle diameter is optimized for road and cyclocross disc applications at 12mm. Whether you are racing on the World Cup cyclocross circuit or riding gravel events like the Crusher or Dirty Kanza, the ENVE thru-axle cyclocross disc fork is designed to perform in these environments. - 1-1/8 – 1.5-inch tapered steerer
Salsa Cutthroat Fork
$499.00
The Cutthroat carbon fork is full of features, ready for any adventure. - Full Carbon fork, tapered steerer - Fits 29 x 3.0" tires - Three-Pack mounts - Crown light mount - Axle to Crown Length: 483 mm - Brake Mount (Fork): Post Mount 160 - Crown Race: 40 - Front Axle: 15mm Thru x 100mm - Wheel Mount Center Offset (mm): 0 - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Steerer Tube Length (mm): 260 mm - Wheel Size: 27.5+ , 29" , 29+ - Rotor Size (Fork): 200 - Maximum Tire Clearance (Fork): 3
Surly Wednesday Fork
$185.00
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in “official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
WeThePeople Message Fork
$159.99
The WeThePeople Message Fork is a super tough, yet elegantly designed fork for park riders looking for a balance between strength and weight. Using a super tapered leg, shorter 28mm offset, and a unique investment cast fork cap, the Message fork comes with a reinforced longer steerer tube allowing you to run a Gyro or your personal choice of spacers to dial in your bike to perfection. - Investment cast fork cap - 7075-T6 alloy top bolt, M24 thread - Integrated crown race, designed to work with integrated headsets with a 45-degree bearing - Full liquid post heat-treatment on 4130 “M2“ CrMo - Fully CNC’d steerer, internally and externally butted
RockShox Pike RCT3 Solo Air (26-inch)
$849.00
RockShox's Pike RCT3 Solo Air is the ultimate fork for all-mountain and enduro riding. Burly 35mm stanchions, magnesium lowers, and a lightweight hollow forged aluminum crown deliver supreme stiffness to rip down the toughest enduro courses. When the bumps come hard and fast, RockShox's Charger damper keeps the fork high in the travel to maintain proper bike geometry, all while soaking up everything from flowy dirt ribbons to crazy rock-strewn goat paths. The RCT3 three-position switch changes between full travel, lockout and threshold modes so you can save your legs on a transition stage and open it up to pin the next timed downhill.
Surly Pugsley Fork Offset
$116.00
This fork will accept 26-inch tires up to 3.8-inch with plenty of clearance, even using rims as wide as 82mm. It requires a wheel built offset to match the Pugsly frame (17.5mm). Since the hub spacing is 135mm (mountain rear) this is a useful feature, especially in remote places and extreme temperatures or conditions. Should your freehub seize due to cold, invasive grit or other reasons, you can swap wheels and keep moving. Internally butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide)
Surly Ice Cream Truck 150 Fork
$185.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
WeThePeople Patrol Fork
$164.99
Built to go fast and high, the Patrol fork by WeThePeople uses 4130 "M2" Chromoly tubing and features CNC machined micro dropouts that perfectly match the dropouts on the Patrol frame. Rounded off with its own 7075 alloy top cap, if you're looking for a strong, dependable fork with classic styling, look no further. - Lightly tapered legs - 7075-T6 alloy top bolt, M24 thread - Integrated crown race, designed to work with integrated headsets with a 45deg bearing *Please Note: WTP does not recommend the use of pegs on the Patrol fork
Surly Moonlander Fork
$116.00
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
RockShox Remote Upgrade Kit - PopLoc
$71.00
• Upgrade from crown adjust to remote adjust • Includes PopLoc remote lever (left) and compression damper • Available for Recon Silver, Sektor Silver, XC 32, and Paragon
Dimension 1-Inch Threaded 700c Road Fork
$85.00
Dimension Road Forks are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Weight: 692g - Wheel Size: 700c
RockShox Pike RCT3 DebonAir 29+
$369.99
When RockShox re-launched Pike in 2013, it immediately became the benchmark for Trail and Enduro forks, with a supple and progressive feel that simply could not be matched. To ensure Pike’s continuing domination of the class, we put it on a weight-loss program, added the new Charger 2 Damper, included remote options, and gave it a graphic-package makeover that aligns with the all-new Pike’s chassis design. Riders will benefit from Pike’s increased steering authority—thanks to BOOST-only spacing, stiffness and lighter overall weight—the new friction-reducing DebonAir air spring, and the potential to run wider (2.8") tires. - Every aspect of the all-new Pike has been optimized to guarantee stiffness and signature ride quality while focusing on weight reduction - Pike now focuses on Trail, leaving longer-travel Enduro applications to Lyrik - All-new chassis and all-new look - New Charger 2 Damper with OneLoc remote options - 160mm max travel for 27.5" and 140mm max travel for 29" options - Updated air pressure guides maximize performance for E-MTB applications - New DebonAir air spring for increased small bump sensitivity and mid-stroke support. - External rebound damping adjustment - Low speed compression adjustment - 3-position compression adjustment (Open/Pedal/Firm)
RockShox Pike RCT3 DebonAir 29+
$879.00
The RockShox Pike is like a stealth bomber designed specifically for new-school trail riders. Its new damper rides high in the travel where it’s the plushest. Its industry redefining asymmetric approach to chassis design delivers an unparalleled stiffness to travel to weight ratio that will have other engineers playing catch up for years. The RCT3 Charger 2 Damper with DebonAir air spring delivers increased small bump sensitivity and mid-stroke support. The firm setting has also been re-tuned to better match RockShox rear shocks, with OneLoc compatibility which allows on-the-fly suspension control. - Charger 2 Damper with DebonAir spring - Lighter chassis with signature Pike stiffness - Fast Black coating on the upper tubes provides improved durability and decreased friction - Crown Race: 40mm - Offset: 51mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 29+ - Stanchion Diameter: 35mm - Maximum Tire Width: 81mm - 29 x 3.0" maximum tire size - Maximum Tire Width: 82 mm
RockShox Recon RL with OneLoc Remote
$319.00
The RockShox Recon sets the benchmark for value-based performance. Recon represents a perfect partnership between Reba’s lower legs and bombproof RockShox steel Fast Black upper tubes. Adopting the Reba chassis allowed the design team to employ shorter upper tubes, which means Recon just went on a serious weight-loss program. The Motion Control damper features low speed compression adjustment to lockout. - NEW "E-MTB" decal for Diffusion Black options - Fast Black steel upper tube finish - Solo Air spring - Right OneLoc remote included
ENVE Road Fork Rim Brake
$387.00 - $427.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
Surly Midnight Special 650b Fork
$185.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
RockShox Fork Service Kit
$17.00 - $40.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox Judy Silver TK with OneLoc Remote
$684.99
Who says entry-level bikes can’t get all the latest features and performance? Judy is built around a bold chassis designed with the same philosophy as the award-winning Pike for the demands of modern mountain biking: stiff, yet very light. BOOST allows extra room for Plus tires (up to 2.8" in both the 27.5" and 29" models), while Torque Cap compatibility adds additional stiffness and control to the fork/wheel combo. - TurnKey lockout damping compatible with PopLoc remote - Fast Black for steel upper tube finish - Fits tires up to 2.8" - Includes Maxle Lite, star nut, & Right PopLoc Remote
Enduro Wiper And Seal Kits
$23.00 - $29.00
- Blue polyurethane upgrade dust wipers and oil seals - Dual lip offers improved seal with lower stiction - Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings - Fox 40mm kits include wipers and seals
Whisky Parts Co. No.9 RD+ Flat Mount
$520.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
Page 1 of 4 Next page