Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: Red is low; Yellow is mid; Blue is High. - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance
Beautiful biomotion The Halo S1 Softshell Shoe Cover is your answer for day and night detectability at temps at or above 30-degree F/-1-degree C. With both high-viz color and reflective material in a single garment, Halo provides ultimate visibility, day or night. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Provides biomotion visibility to ensure you're seen by motorists day or night - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance bio-motion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures
Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding
Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene
Key features: - Low-profile, micro-release ratchet buckle - Compatible with 2014-Current shoes - Left/right-specific design - Sold in pairs - For optimal hold, it's highly recommended to also replace the ratcheting straps
Key features: - Low-profile, micro-release ratchet buckle - Compatible with 2013 and older shoes - Left/right-specific design - Sold in pairs - For optimal hold, it's highly recommended to also replace the ratcheting straps
Key features: - Compatible with all BOA equipped Bontrager shoes except Circuit and Sonic - Mix-and-match buckle and shoe colors to get a unique and customized look - Left/right specific design - BOA IP1 dial kits include dial, 1m of lace, T6 tool, and instructions - Red dials only include the dial - no lace - For additional service/warranty information visit: www.boatechnology.com
Keep dirt and debris out of your shoes with Pearl Izumi's Ultra Gaiters. The anatomic panels provide a performance fit and the two-stage hook-and-loop closures make pulling them on/off super easy. The gaiters hook to laces or straps and have a durable bottom strap that slips over your shoes for a secure fit.
Get the advantage of more grip with the Sabertooth Toe Spike Kit. The super-strong forged aluminum design easily mounts to any mountain bike shoe with front toe ports for a tighter grip when navigating cyclocross barriers, run-ups, and any off-bike section in less than ideal conditions. Key features: - Aggressive, earth-churning design - Made from precision forged stainless steel - Includes stainless steel mounting hardware
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
Fits SP Carbon, Vent Carbon, Eleven Carbon/Composite, Millenium 4, Carbon Composite, and Carbon Lite soles
Sidi's Tecno 3 Buckles are mono-filament ratchet enclosures that deliver a precise fit. They can be easily adjusted via two buttons on the side that loosen one ratchet tooth at a time. To tighten, simply lift and turn the center buckle. Simultaneously pressing both buttons allows you to quickly and easily get out of the shoe.
Sidi's Caliper Straps are compatible with their Caliper Buckles (sold separately) to deliver a secure fit with the Soft Instep Closure System.
The classic must-have ELITE Thermal Toe Covers are updated with reflective logos. Features: ELITE Softshell provides superior wind and water protection Simple pull-on design Reflective elements for low–light visibility Recommended for road shoes with external cleats Top: 70% nylon, 15% spandex, 15% polyurethane, Bottom: 93% nylon, 7% spandex, Imported.
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
• Replacement ratchet tongue for selected styles of shoes • 2 pieces • 93mm
• Replacement ratchet set for Louis Garneau's Monte shoes (sold separately) • 2 pieces
• Replacement ratchet set for selected styles of Garneau's shoes • 2 pieces
When riding in cold and wet weather, our body’s extremities are usually the first to suffer from the cold. Garneau's Neo Protect II Shoe Covers are designed to keep your feet warm and protected so you can continue riding no matter what the weather has in store. Boasting 3mm of windproof neoprene, they create a barrier between you and the wind and cold. You'll love the Velcro backs that make for easy on/off and the reflective logos for enhanced visibility!
Serfas' MTB Cleats are durable steel replacement cleats for use with Shimano SPD-compatible clipless pedals and shoes. They offer 4 degrees of float and weigh 73 grams per pair. If your old cleats are Shimano model SH51, SH55 or SH56, these replacements will work. Installation hardware is included.
Replacement studs for Louis Garneau MTB and cyclocross shoes. Contains four 8mm-tall studs and a stud remover tool.
Moisture management is one of the most important elements of winter cycling and can make or break a ride. On long rides in extreme conditions, having a spare pair of 45NRTH's Wølfgar boot liners means you can ride confidently knowing that you have a dry, fresh pair when you need it. Constructed with a wool/polyester blend for durability, Wølfgar's liner boot wicks moisture away from your skin while still maintaining its insulation value to keep your feet dry and comfortable. Hook-and-loop on the heel secures the liner inside the shell boot. For use with 45NRTH Wølfgar boots only (sold separately)
These shoe covers are equipped with a patent-pending top zip opening that provides added aeration and allows riders to adjust shoes bearing a dial closure while riding. FABRICS: -NEOPRENE EXTREME 3 MM: Warmth, blocks cold and water DETAILS: -Patent-pending Thermo Air technology: Sealed zip opening at side allows easy access to attach system and provides aeration -Silicone elastic at the cuff: Better fit and prevents infiltrations Back opening with seam-sealed zip: Easy pull-on and water resistant -Sealed tape on seams: Water resistant -Water resistant -Flatlock seams: Enhanced comfort -Reinforced kevlar under sole: Better durability -Reflective puller
The in-between solution to protect your feet on those chilly days. FABRICS: -ISO LITE: Provides warmth in cool weather -ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: -Cleat opening under sole -Flatlock seams: Enhanced comfort -Reflective puller
Key features: - Replacement strap for buckled Bontrager Road and MTB shoes - Compatible with 2009-2015 shoes, or all straps with this shape - Sold in singles - For optimal hold, it's highly recommended to also replace the buckle
Key features: - Genuine replacement heel studs for your Bontrager road shoes - Maintains traction when walking off-the-bike - Includes mounting screws
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
Caterpy Laces, or what some of our customers like to call us “Caterpillar Laces“, are the world’s top selling no tie shoelaces. They use elastic bump technology to hold customized tension throughout all eyelets. Invented in Japan by a marathon runner, Caterpy Laces strives to solve all shoelace issues. These issues range from inconsistency of tension throughout the shoe, lack of adaptivity for different foot shapes and inconvenience of tying laces. Often times, people think foot pains develop from an improper shoe, when it may be from improper laces. Although Caterpy Laces are designed for athletic wear, the product is popular among other markets including kids, elderly, medical and special needs. They’re the perfect fit for joes to pros! Non-tying active laces with patented elastic technology that provides adjustable tension between shoe eyelets. Premium laces designed to enhance a broad range of shoes. Step 1: Insert Caterpy Laces in your shoe as you would with conventional laces. No hardware or add-ons needed. Step 2: For optimal fit or kids, cut laces and leave 2-3 bumps out of the last eyelet. Do not cut directly on the bump. Length: 30inches Materials: Nylon, Rubber, Silicon, Acetate Patent – PAT.5079926
Giro cycling shoes are designed for adventures, but sometimes conditions demand more. With the Toe Spike Kit, your mountain bike shoes can handle the toughest adventures. These machined steel toe spikes are designed to provide added traction in loose or slippery terrain. They are easy to install using the included wrench, and they are compatible with all Giro off-road shoes and most toe-spike-compatible MTB shoes from other brands. Harsh conditions won’t interrupt your adventures because the Toe Spike Kit will let you keep traction and keep moving.
Page 1 of 2 Next page